Operating Instructions; Use Of The Remote Control - Diamond Digital DV321 User Manual

OPERATING INSTRUCTIONS

USE OF THE REMOTE CONTROL

POWER
Press to turn on/off the
TV. The TV is never
completely powered off
unless it is physically
unplugged.
CH
(or ▲ or ▼
Press or
button) to browse through
the TV channels which
are not erased.
0~9/100 Digit button s
To select a TV channel.
VOL
Press + or – (or
button) to adjust the
volume.
NICAM
To select Mono
/Stereo/Sound A /Sound
B/Sound AB from TV RF
input.
SLEEP
With this key you can set a
time period after which the
TV should switch itself to
standby. Press the key
repeatedly to select the
number of minutes. The
counter runs from 30, 60, 90,
120 minutes. The timer
begins to count down from
the number of minutes
selected after the display has
disappeared.
PIP
Select PIP on/off.
or
MENU
to display OSD menu.
DPF
N ot support.
WIDE
Includes 3 modes: Press
repeatedly to select 4:3
/16:9 /
16:9 non-Linear.
SWAP
Not support.
Press repeatedly
6
MUTE
Temporarily interrupt the
sound or restore it.
DISPLAY
(1) Display Channel number
when use RF input.
(2) Display input source
when use other input
except TV RF input.
RECALL
To display the previously
selected TV channel.
TV/VIDEO
Select your input source:
press repeatedly to select
TV, AV1, AV2, S-VIDEO or
COMPONENT mode,
according to where you
connected your external
source.
AV1/AV2 for a VCR
connected to the AV
connectors of the TV.
S-VIDEO for a S-Video
VCR connected to the S-
VIDEO connector of the
TV.
COMPONENT for a
DVD/DTV Set Top Box or
another component video
device connected to Y,
Pb, Pr and to the AV
AUDIO inputs L and R.
WIRELESS
Not support.
PC
select your input source
to PC.