Related Manuals for QSC TSC-7w
Summary of Contents for QSC TSC-7w
- Page 1 ™ Hardware Installation Manual TSC-7w – Networked, Wall Mounted, 7" Touchscreen Controller TD-000485-01 -A *TD-000485-01 *...
-
Page 2: Explanation Of Symbols
EXPLANATION OF SYMBOLS The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death. The term “CAUTION!” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result in damage to the equipment that may not be covered under the warranty. -
Page 3: Maintenance And Repair
The Q-Sys TSC-7w product is in compliance with European Directive 2011/65/EU– Restriction of Hazardous Substances (RoHS2). The Q-Sys TSC-7w product is in compliance with “China RoHS” directives. The following chart is provided for product use in China and its territories: Q-Sys TSC-7t 部件名称... - Page 4 TSC-7w to join a Q-LAN network via standard 10/100/1000 Mbps Ethernet connections. The TSC-7w uses a color graphics display with a 400 nit anti-glare LCD. The control surface is a capacitive touch interface that is reliable, bright, and easy to use.
- Page 5 TSC-7w Rear Panel and Connector Edge Features LAN A/PoE LAN B 12V DC RESET — Figure 2 — 1. Mounting-hook slots (4 places) 6. 12V DC AUX Power input (power supply not included) 2. Mounting screws (secures unit to the mounting ring) 7.
- Page 6 3. Outside Flange (4) 7. Mounting Ring Hooks 4. Touchscreen Securing Screw Holes (2) Touchscreen TSC-7w Packing List 1. Q-Sys TSC-7w Touchscreen Controller 5. Mounting Ring Assembly (1) – The assembly includes: 2. Hardware Installation Guide TD-000485 a. Flip Clamps (4) 3.
-
Page 7: Installation
Installation The Q-Sys TSC-7w is designed to be mounted in a wall, or podium/desk, and so on. When you are mounting the unit in a wall, there are two options, mounting the unit during construction of the wall, or mounting into an existing wall. The following instructions cover both installation options. - Page 8 Mounting the TSC-7w in a Wall or Podium This procedure covers installing the Mounting Ring in an existing wall or podium. CAUTION!: Before cutting the mounting hole, make sure that there is nothing behind the wall/podium that can be damaged during the cutting operation.
- Page 9 Mount the TSC-7w to the Mounting Bracket Refer to Figure 6 1. Align the mounting slots (1) on the TSC-7w with the mounting hooks (2) and carefully slide the TSC-7w into the Mounting Bracket. Make sure the cables are not pinched or stressed.
- Page 10 TSC-7w Dimensions 154 mm 6.1 in. 198 mm 7.8 in. TD-000485 -01 -A...
- Page 11 TSC-7w Specifi cations Specifi cation Value Display LCD Touchscreen 7” Projected Capacitive Touch (dual coordinate simultaneous touch sensitivity) Luminance: 400 nits (400 lumen/candela per square meter) Resolution: 800x400 Rear Panel Control Reset Button (Use a paper clip or similar tool to reboot the unit)
- Page 12 FAX: +1 (714) 754-6173 © 2014 QSC Audio Products, LLC. All rights reserved. QSC, the QSC logo, Q-Sys, the Q-Sys logo, and Q-LAN are trademarks of QSC Audio Products, LLC in the U.S. and other countries. All other trademarks are the property of their respective owners.