Emergency start function (Multidrive or automatic transmission
vehicles with smart entry & start system)
When the engine does not start, the following steps can be used as
an interim measure to start the engine if the "ENGINE START STOP"
switch is functioning normally.
Set the parking brake.
STEP
1
Put the shift lever in "P".
STEP
2
Set the "ENGINE START STOP" switch to ACCESSORY
STEP
3
mode.
Push and hold the "ENGINE START STOP" switch about 15
STEP
4
seconds while depressing the brake pedal firmly.
Even if the engine can be started using the above steps, the system
may be malfunctioning. Have the vehicle checked by any authorized
Toyota dealer or repairer, or another duty qualified and equipped pro-
fessional.
AVENSIS_OM_OM20B88E_(EE)
5-2. Steps to take in an emergency
5
695