Table of Contents
Advertisement
U s e r M a n u a l D r e a m b o x D M 7 0 2 5
11.1.6 Tuner 2 setup (DVB-S)
The same setup possibilities that applied for Tuner 1 also apply for Tuner 2. There are some
additional configuration options.
Equal to socket A:
Use this setting if Tuner 2 should use the same settings as Tuner 1.
Loopthrough to socket A:
Use this option if you connected the LNB1 out to the LNB2 in.
Nothing connected:
Use this option if no cable is attached to Tuner 2.
Secondary cable from motorized LNB:
Use this option if you are using a positioner with a Twin- or Quad LNB and have 2 cables from the
LNB connected to the LNB1 and LNB2 in. Tuner 1 controls the positioner and using Tuner 2 you can
continue watching TV on the same satellite while recording. All others are grayed out.
- 68 -
english
Advertisement
Table of Contents
