Beko WMY 61243 CS PTLB1 User Manual page 18

• Máchání (R nse)
Use when you want to rinse or starch separately.
• Odstřeďování (Sp n + Dra n)
Use to drain the water in the machine.
4.3.6 Temperature select on
Whenever a new programme is selected, the recommended temperature for the programme appears
on the temperature indicator. It is possible that the recommended temperature value is not the
maximum temperature that can be selected for the current programme.
Press the Temperature Adjustment button to change the temperature. Temperature will decrease
by increments of 10 °C.
Finally, "-" symbol indicating the cold wash option appears on the display.
C
No change can be made in programmes where temperature adjustment is not allowed.
You can also change the temperature after the washing starts. This change can be made if the
washing steps allow it. Changes cannot be made if the steps do not allow it.
C
If you scroll to cold wash option and press Temperature Adjustment button again, the recommended maximum
temperature for the selected programme appears on the display. Press the Temperature Adjustment button again
to decrease the temperature.
4.3.7 Sp n speed select on
Whenever a new programme is selected, the recommended spin speed of the selected programme is
displayed on the Spin Speed indicator.
C
It is possible that the recommended spin speed value is not the maximum spin speed that can be selected for the
current programme.
Press the Spin Speed Adjustment button to change the spin speed. Spin speed decreases
gradually.
Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the
display.
C
Spin Speed Adjustment button only serves for decreasing the spin speed.
Rinse Hold option is indicated with "ı_ı" symbol and No Spin option is indicated with "_" symbol.
18 / EN
88
C
0
88:88
1888
C
0
-
88:88
1888
88
C
0
88:88
1888
Wash ng Mach ne / User's Manual