Seiki SE32HY01UK User Manual page 23

BASIC FEATURES
Channel Management (ATV / DTV Mode)
Common Interface (DTV mode)
To view the module information.
1. Press the MENU button to display the
main menu. Press the
Channel in the main menu, then press the
or OK button.
2. Press the buttons to select Common
Interface and then press the OK button.
Auto Scan
Manual Scan
Channel Edit
Common Interface
Signal Information
Move
3. A Common Interface main menu will pop up.
Press the buttons to select the items and
press the OK button to confirm.
Common Interface
Conax Conditional Access
1. Product Ordering
2. Subscription Status
3. Event Status
4. Change CA PIN
5. Maturity Rating
Move
4. Press the EXIT button to exit the menu.
The common interface allows the use of a
Common Access Module to enable you to
view scrambled (pay to view) services. These
services are provided by TopUp TV (UK only)
and others. The Common Access Module and
viewing card can be obtained from the service
provider.
Do not repeatedly insert or remove the Common
Access Module as this may damage the interface
and cause a malfunction.
This feature is not available in all country.
CI (Common Interface)
Allows the Common Access Module to be
inserted and access the content that has been
encrypted.
22
buttons to select
Channel
OK: Select MENU: Return EXIT: Exit
OK: Select MENU: Return EXIT: Exit
To insert the Common Access Module
1. Before you insert the Common Access Module, ensure
that the TV is switched off and the viewing card is
inserted in accordance with the Service Provider's
instructions.
2. Insert the Common Access Module into the slot. Flip
the Common Access Module to another side and try
again if you feel resistance.
3. Switch the TV on.
To remove the Common Access Module
1. Before you remove the Common Access Module,
ensure that the TV is switched off.
2. Pull the Common Access Module from the slot.
3. Switch the TV on.
Signal Information (DTV mode)
1. Press the MENU button to display the
main menu. Press the
Channel in the main menu, then press the
or OK button.
2. Press the buttons to select Signal
Information and then press the OK button to
view the Signal Information..
Signal Information
Network Name
Channel
Frequency
Modulation
Strength
Quality
3. Press the EXIT button to exit the menu.
Common Access Module
buttons to select
South Yorkshire.
CH22
482.00 MHz
64 QAM
96
49
MENU: Return EXIT: Exit