LG DLE3050 Owner's Manual page 37

Before calling for service (cont.)
Drying time is not
consistent clothing is not consistent.
Clothes take too
long to dry
too long.
tripped, or power outage has occurred.
Clothes are wrinkled
ends.
Clothes are shrinking
followed.
The display shows
only)
is on during the
drying cycle
TM
FLOW SENSE
indicator shows four restrictions.
bars during the drying
cycle
lint buildup or debris.
the external dryer venting.
of heat used (electric, natural gas, or LP gas), the size of the load, the type of
fabrics, the wetness of the clothes, and the condition of the exhaust ducts and
lint filter.
longer to dry.
To help reduce and maintain more consistent drying times for large and heavy
fabrics, separate these items into smaller loads of a consistent size.
produce high amounts of lint, it may be necessary to clean the filter during the
cycle.
lint, and obstructions. Make sure that outside wall dampers can open properly
and are not blocked, jammed, or damaged.
problem is a circuit overload, have it corrected by a qualified electrician.
tumbling action.
time, and remove items while they still retain a slight amount of moisture.
up to 3 hours.
your garment, because some fabrics will naturally shrink when washed. Other
fabrics can be washed but will shrink when dried in a dryer. Use a low or no
heat setting.
repaired. Using the dryer with a severely restricted exhaust is dangerous and
could result in a fire or other property damage.
strong airflow.
Dryer can be used in this condition, but drying times may be longer.
will remain on for two hours after the end of the cycle. Opening the door or
pressing the POWER button will turn off the display.
37
TROUBLESHOOTING
TM
system, the indicator