Advertisement
CONTROL PAD
BEFORE USING YOUR HAND MASSAGER
• Remove the transparent sticker from the control panel.
• Plug the power adapter into the Hand Massager, then plug it into an AC outlet.
• Place the device on a flat, level surface.
• Insert one hand into the cloth-lined chamber.
NOTE: Please be sure to remove all sharp jewelry. Do not operate if you have sharp fingernails.
TURNING IT ON
With one hand in the chamber, use your other hand to press the ON/OFF/TIMER button. The LEDs
on the Control Pad will flash, and the LCD screen will display a countdown, from 10 to 0. Then, the
unit begins to work in its Default Mode.
NOTE: In Default Mode, the unit starts on Wave Massage (High Pressure) and the auto shutoff
timer is set to 15 minutes. (The LCD displays the number 15.)
AIR PRESSSURE (STRENGTH)
When you turn the unit on, the default strength is on High Pressure. Press the PRESSURE button
one time to switch to Low Pressure. If you want to switch back to High Pressure, simply press the
PRESSURE button again.
MASSAGE MODE
When you turn the unit on, the Default Mode is in WAVE MASSAGE. Press the BASIC MASSAGE
button at any time to switch from Wave Massage to Basic Massage.
Advertisement
