Page 1
ORIGINAL INSTRUCTIONS 18V ONE+ Line Trimmer RLT1830LiX4 RLT1830LiX5 RLT1830Li13 RLT1830Li15 OLT1830...
Page 2
Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining the product. Subject to technical modifications.
Safety Safety, performance, and dependability have been given entanglement in moving parts. top priority in the design of your line trimmer/edger. ■ Keep all bystanders, children, and pets at least 15 m away. ■ Stay alert. Do not operate this unit when you are tired, ill, INTENDED USE or under the influence of alcohol, drugs, or medication.
Safety ■ Make sure all guards, straps, deflectors and handles a battery pack or charger that has been dropped or are properly and securely attached. received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged ■...
Page 9
KNOW YOUR PRODUCT ■ If any parts are damaged or missing, please call Ryobi See Figure 1. Customer Service for assistance: The safe use of this product requires an understanding AUS: 1300 361 505 of the information on the product and in this operator’s...
Figure 8 can result in serious personal injury. 17. Pivot button This product will accept Ryobi One+ 18V lithium-ion battery Figure 11 18. Line release button packs and Ryobi One+ 18V nickel-cadmium battery packs.
Page 11
Safety The angle of the front handle can be adjusted 180°. ■ Do not allow cutting head to contact the ground. ■ Remove the battery pack. ■ Wire and picket fences cause extra line wear, even breakage. Stone and brick walls, curbs, and wood may ■...
Tighten securely all fasteners and caps. Do not operate this product until all missing or damaged parts are ■ Remove the battery pack. replaced. Please call Ryobi Customer Service or contact an ■ Remove the spool from the cutting head. authorized service center for assistance.
Page 13
Safety Indicates a potentially SYMBOL hazardous situation, which, CAUTION: if not avoided, may result in Safety alert minor or moderate injury. (Without Safety Alert Symbol) Please read the instructions carefully CAUTION: Indicates a situation that may before starting the machine. result in property damage.
PRODUCT SPECIFICATIONS Model RLT1830LiX4 / RLT1830LiX5 / RLT1830Li13 / RLT1830Li15 / OLT1830 18 Volts Voltage 305 mm Cutting capacity 1.65 mm Cutting line diameter 2.3 kg Weight (without battery) BATTERY AND CHARGER RLT1830LiX4 RLT1830LiX5 RLT1830Li13 RLT1830Li15 OLT1830 Model Battery pack...
TROUBLESHOOTING Problem Possible cause Solution Line is welded to itself. Lubricate with silicone spray. Not enough line on spool. Install more line. Refer to Line replacement earlier in this manual. Line will not advance when using the auto-feed head. Line is worn too short. Pull line while pressing the black button located on the cutting head.
Page 16
Techtronic Industries (Australia) Pty. Ltd. 31 Gilby Road, Mt Waverley, VIC 3149, Australia Techtronic Industries New Zealand Ltd. 2 Landing Drive, Auckland Airport, Mangere, New Zealand 2022 960994046-02...