Find; Main Menu Find Buttons (Address, Favorites, Poi, History); Selection By Tapping The Map - Mio MioMap User Manual

Mio technology user manual car gps receiver miomap

Table of Contents

5 Find

One of the most frequently used functions of MioMap is selecting the destination.

Once you have the destination, you can start navigating. Getting to this point should

be as fast as possible. MioMap provides you with a versatile search engine designed

to find your chosen destination after only a few taps on the screen.

Note: If you select a location in any part of the Find system, you will normally drop

back to the map screen, where you will have several possible actions (set as start,

set as destination, add as via, continue route with, mark with a pin, or add as a POI

item). However, if you enter the Find system from the Main Menu, MioMap will

immediately put you into Cockpit mode and start navigation.

As just mentioned, the fastest way to find your destination and start navigating is to

start from the Main Menu (Main menu) with one of the Address, Favorites, POI or

History buttons. These will put you on the respective Find screen, and as soon as

you pick a destination, MioMap will immediately show the Cockpit screen and start

navigation. This means that if you plan your route to one of your Favorite

destinations, you only need two taps (e.g. Favorites then Home) to start navigating.

You will find similar buttons in the Find menu (Page 53) accessible from the map

screens. Activated from the map screens, they will only move the cursor to the

desired location, but will not directly initiate navigation.

It is also very easy to set your destination using the map. Just browse to your

desired destination on the map, tap it, and the Cursor menu with the possible actions

will then open automatically.

Note: When appearing automatically, the Cursor menu remains open for a few

seconds only. If you decide not to choose any of the actions listed, the menu closes

Table of Contents