Wireless Network Connection - Mio DigiWalker A701 User Manual

Wireless Network Connection

Use a wireless network card to connect to a wireless network without physical
cables.
Before creating the connection, you need to:
Have a wireless network card (SD IO card) that is compatible with A701.
(For driver and installation procedures, see the documentation that came
with the SD IO card.)
If necessary, obtain the authentication information from your network
administrator.
Creating a Wireless Connection to a Network
1. Install the wireless network card.
2. By default, A701 will automatically detect the available wireless networks.
3. If more than one network is detected, the
screen will display a network list. Tap the
desired network and tap the
4. Select to connect to the Internet or the
private network, and then tap the
soft key.
5. If the selected network requires a network
key, enter the key and tap the
key.
NOTE: To change the network settings, tap
Settings
the desired network and change the settings.
Getting Connected
OK
Connections Network Cards. Tap
soft key.
Connect
Connect
soft
7-3