Introduction For Buttons On Remote Controller - C&H AIR-MASTER SeriesCH-S07RX4 Owner's Manual

Introduction for buttons on remote controller

Caution: After putting through the power, the air conditioner will give out a
sound. Operation indictor "
the air conditioner by using remote controller.
ON/OFF button
1
Pressing this button can turn on or turn off the air conditioner. After turning on the air
conditioner, operation indicator "
colour is different for different models), and indoor unit will give out a sound.
MODE button
2
Press this button to select your required operation mode.
● When selecting auto mode, air conditioner will operate automatically according to ex-
a f c o t y r s e t t n i
"FAN" button can adjust fan speed. Press " " button can adjust fan blowing angle.
● After selecting cool mode, air conditioner will operate under cool mode. Cool indicator
" " on indoor unit is ON. Press "+" or "-" button to adjust set temperature. Press "FAN"
button to adjust fan speed. Press "
● When selecting dry mode, the air conditioner operates at low speed under dry mode. Dry
indicator "
" " button to adjust fan blowing angle.
● When selecting fan mode, the air conditioner will only blow fan, no cooling and no
heating. all indicators are OFF. Press "FAN" button to adjust fan speed. Press "
button to adjust fan blowing angle.
● When selecting heating mode, the air conditioner operates under heat mode. Heat
indicator "
Press "FAN" button to adjust fan speed. Press "
(Cooling only unit won't receive heating mode signal. If setting heat mode with remote
controller, press ON/OFF button can't start up the unit).
Note:
● For preventing cold air, after starting up heating mode, indoor unit will delay 1~5
minutes to blow air (actual delay time is depend on indoor ambient temperature).
● Set temperature range from remote controller: 16~30℃ ; Fan speed: auto, low speed,
medium speed, high speed.
" is ON (red indicator). After that, you can operate
AUTO COOL DRY FAN
. g S t e e t m p e a r u t e r
" on indoor unit is ON. Under dry mode, fan speed can't be adjusted. Press
" on indoor unit is ON. Press "+" or "-" button to adjust set temperature
" on indoor unit's display is ON (green indicator. The
c a n t ' b e a d u j s e t d a
" button to adjust fan blowing angle.
8
HEAT
n d w l l i n t o b e d s i p
" button to adjust fan blowing angle.
a l y e d a s w e . l l P e r s s
"