Rider Information Center - Polaris 2016 RANGER EV Li-Ion Owner's Manual

Instrument Cluster

Rider Information Center

The rider information center is located
in the instrument cluster. The
information center is set to display
standard units of measurement and a
12-hour clock at the factory. To
change to metric and/or a 24-hour
clock, see page 26.
Information Display
This area will display clock, odometer,
trip meter, state of charge (SOC),
range meter, efficiency rate (EFF) or
any existing fault codes or warning
messages. See page 26.
Miles/Kilometers Indicator
The miles or kilometers indicator illuminates to indicate the mode of measurement selected.
AWD Indicator
This indicator illuminates to indicate the selected drive mode (AWD/2WD/1WD).
Fault Indicator
When both the chassis fault lamp and the fault indicator (wrench symbol) illuminate, use the
mode button to toggle through fault codes or warning messages in the display. Your
authorized POLARIS dealer can provide code details and diagnosis.
State of Charge
This indicator illuminates when the key is turned on. It also
illuminates 8-10 seconds after the charging cord is connected,
turning off when the batteries are 100% charged. To verify a full
charge or to check the state of charge, turn the key on. As charge
is depleted, illuminated bars begin to turn off from right to left.
Remaining bars indicate remaining battery charge.
Drive Mode/Direction Selection Indicator
This indicator displays the selected forward drive mode or
neutral or reverse.
H or M or L = High or Max or Low forward operation
N = Neutral
R = Reverse (flashing)
FEATURES AND CONTROLS
Information Display
State of Charge
Drive Mode/Direction
Selection
Miles/
Kilometers
Indicator
AWD
Indicator
Fault
Indicator
State of Charge
Indicator
Bars % Of Charge
1 Less Than 10
2 10-20
3 20-30
4 30-40
5 40-50
6 50-60
7 60-70
8 70-80
9 80-90
10 90-100
25