Table of Contents
Advertisement
Checking the display-limit check box will indicate when any of the image values exceed 0 (black limit)
or 255 (white limit) with the complementary color. For example, if the blue area of the image exceeds
those values, the limit is displayed with the complementary color, yellow.
Click the close button to close the palette to apply any image corrections.
Click the best image among the frames. The
selected image becomes the new center surround-
ed by a set of new images and the change is
applied to the prescan image. This procedure can
be repeated until the desired correction is
obtained. Click the reset button to cancel all
changes.
The difference between the samples can be
changed. Drag the variation-step slider, or enter a
value into the text box to set the degree of correc-
tion. The initial setting is 10. The correction step
can be set between 1 and 20.
33
Advertisement
Table of Contents
