Pairing Device - iHome iBT70 Instruction Manual

Pairing Your Device
Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT70. Once your device is
paired, the iBT70 can recognize it and you can play your audio through it.
off on
4. "iHome iBT70" should appear in your device's Bluetooth menu. If "Not Paired", "Not Connected" or similar
message appears, select "iHome iBT70" to connect it. If prompted for a passcode, enter "1234" on your
device's keypad.
iHome iBT70
For iPhone
5. If pairing is successful, 1 beep will sound and the Bluetooth status indicator light will appear solid blue (in
Color Mode, cabinet will flash blue twice), indicating the iBT70 is ready to play music. There should also
be an indication on your device. If no device is successfully paired within 3 minutes the iBT70 will default
to previous mode. Once the iBT70 is paired to a device, it will attempt to autolink when the device is
within range (about 30 feet).
1. Turn on your Bluetooth device and make it "discoverable" by turning on Bluetooth
mode (check in Options or Settings).
2. Slide the Power On/Off Switch to ON to turn on the iBT70. The first time the unit is
powered on, it will enter auto-pairing mode and attempt to connect to a Bluetooth
device (if so, skip to step 4). Otherwise, follow step 3 to begin pairing.
3. Press and hold the Bluetooth/Speakerphone Button for 2 seconds. The iBT70 will
beep and the Bluetooth status indicator light on top of the unit will flash quickly.
If Color Mode is on, the cabinet lights will flash blue and red.
iHome iBT70
Using the
iHome iBT70
For other
5
iBT70
iHome iBT70