Charging Unit - iHome iBT70 Instruction Manual

Getting Started: Carry Strap
The iBT70 has two channels to attach the included carry strap,
one on the bottom to hang the unit like a lantern, and one on the lower
back of the unit. To attach the carry strap, form a small loop in one end of the
carry strap. Insert this loop through the desired channel, then pull the
loop back through the larger loop formed in the carry strap to tighten.
Charging the Unit
CHARGE UNIT BEFORE USE/KEEP UNIT OFF FOR FASTER CHARGING
1. Connect the micro USB plug on the included combination cable to
the micro USB Charging/Aux-in USB Port on the side of the unit.
2. Connect the standard USB plug end of the cable to a power USB port on a computer, a USB AC
adaptor or other USB charging device. For first time use, charge unit for about 4 hours. The status
indicator LED on top of the unit turns solid red while charging and turns off once unit is fully charged.
Charge via computer USB port, USB AC adaptor or other powered USB port
Computer
connected to
working outlet
iHome iBT70 USB port
Computer USB port
USB AC adaptor
(not included)
USB AC adaptor
connected to working outlet
3
OR
iHome iBT70 USB port