Minolta CD-10 Instruction Manual page 20

NOTE: The access indicator may flash on and off even after the eject oper-
ation. In this case, you can remove the PC card set.
NOTE: Do not select the "Eject Disk" command from the "Special" menu to
remove the card set. The CD-10 drive does not have an eject motor. The
disk must be ejected manually.
For IBM PC/AT compatible computers: The lock indicator does
not light in most cases. Remove the PC card set when the access in-
dicator is not lit.
NOTE: When you mount the PC card set with the EZ-SCSI utility, the lock
indicator lights. In this case, unmount the PC card set with the same utility,
then make sure that the lock indicator goes off before removing the card
set.
18