Set Up Your Modem - Huawei E272 Quick Start Manual

Set up your Huawei E272
modem
Before you can start using your new
modem, you'll need to set it up.
You will need to have an activated
Vodafone SIM card – this should have
been provided when the modem was
purchased.
• Put the SIM card into the side of the
modem.
You should have been supplied with
two data cables – one short and
single-ended one, and one long and
double-ended. You only need to use the
double-ended cable if a single USB port
does not supply enough power (if it is a
USB-powered hub for example).
• Plug the single end of the data cable
into the modem as shown.
• Plug the other end into your
computer's USB port – if this does
not power the modem, then use the
double-ended cable.
This should automatically start
the software – see next page.
QSG_VMCLite_v30_08-2007_e272_en-Sec2:3 Sec2:3 QSG_VMCLite_v30_08-2007_e272_en-Sec2:3 Sec2:3
3
15/8/07 10:12:33 15/8/07 10:12:33