Windshield Wipers; Daytime Running Lights - Subaru Outback 2016 Quick Reference Manual

OFF
1
INT.
LOW
HIGH

Windshield Wipers

To turn on the wipers, press the wiper control lever down one level for
intermittent, two levels for low, or three levels for high speed. Return the
lever to the "OFF" position to stop the wipers. For a single wipe, move the
lever up. To spray washer fluid, pull and hold the lever toward you.
To operate the rear wiper, rotate the end of the knob upward to the
intermittent, continuous, or wash position. When the rear wiper is off,
rotate the knob downward to wash and wipe the rear window.

Daytime Running Lights

Daytime running lights are standard on your vehicle. Only a reduced brightness
high beam will be automatically turned on when the engine has started, the parking
brake is fully released and the light switch is in the "OFF" or " " position.
The brightness of the illumination of the high beam headlights is reduced by
the daytime running light system. You must always switch on your headlights
when it is dark outside by turning the light switch to the " " position.
15