Table of Contents
Advertisement
Inside Rearview Mirror
KEYS
Two sets of keys are furnished with your ve-
hicle. Each key has a different cross section so
that it can be inserted only in certain locks.
Key with Square Head-For ignition switch only.
Key with Oval Head-For door lock, glove box
and external utilities compartment .
NOTE : A third key is provided for the water tank
filler door when located on rear of vehicle.
M0VE Lcv'EQ
. .1111
, N AaC. fo
RELEASE
Seat Track Mechanism
MOVE LEVER ;?FAR
ARD
TO REL FASO
SEATS
Seat Swivel Mechanism
The code number of each key is stamped on
the "knock out" plug in the key head . Your
dealer removed these plugs and placed them
with the spare set of keys in the special key
envelope that was given to you at the time of
delivery. For your protection
Record the numbers on the key envelope and
discard the key plugs.
Keep the key envelope in a safe place such
as your wallet, NOT IN THE VEHICLE .
In the event the original keys are lost, dupli-
cates can be made by your dealer or a locksmith
using the key code information . When leaving
the vehicle unattended, remove the keys and
lock the entrance door.
The driver and passenger seats in the driver
compartment may be adjusted to suit an indi-
vidual's preference. To move seat forward or
backward, simply release the seat locking lever
located on the aisle side of the seat. Once re-
leased, exert slight body pressure in the direction
desired. Release lever to lock the seat in the
desired position.
The seats can be swiveled to provide easy
entrance and exit. To turn swivel seat, release
locking mechanism by moving seat swivel lever
(as shown), then turn seat .
Advertisement
Table of Contents
