Software Update - Sharp LC-32LE240EV Service Manual

LC-32LE240
LC-40LE240
19.7. USB Operations
USB operations option can not be used directly. It can be used for updating panel tool, hw
congiguration etc.

20. SOFTWARE UPDATE

In MB62 project there is only one software. From following steps software update
procedure can be seen:
1. MB62_en.bin, mboot.bin and usb_auto_update_T4.txt documents should copy directly
1. MB62 en. bin, mboot.bin and usb_auto_update_mb62.txt documents should copy directly
inside of a flash memory(not in a folder).
inside of flash memory ( not in a folder).
2. Put flash memory to the tv when tv is powered off.
2. Put flash memory to the TV when TV is powered off.
3. Power on the and wait when the tv is opened.
4. If First Time Installition screen comes, it means software update procedure is
3. Power on the TV by main switch and press OK in remote control continuously during 3 -4
succesful.
seconds. Then led will start blinking (red / green) quickly.
4. If First Time installation screen comes, it means software update procedure is successful.
SOFTWARE UPDATE
58