Ignition System; Tightening Torques - Stihl 009 User Manual

STIHL 009, 010, 011
1.3

Ignition System

1.4

Tightening Torques

Fuel mixture:
Air filter:
Type:
Magneto edge gap:
Ari gap:
Ignition timing:
Ignition advance angle:
Breaker point gap:
Condenser:
Ignition armature:
Spark plug (suppressed):
Spark plug thread:
Crankshaft nut
(ignition side) M 8x1:
Clutch (sprocket side):
M 6 socket head screws:
M 5 pan head screws:
M 4 pan head screws:
M 5 nuts:
Spark plug:
Regular grade gasoline and
branded two-cycle engine oil
Mix ratio 1:40 with STIHL
two-cycle engine oil: 1:25 with
other branded two-cycle
engine oils
Large area felt mat
Breaker-controlled magneto
ignition
5 mm (0.2 in)
0.2 mm (0.008 in)
1.8-2.1 mm before T D.C.
23°-24°
0.3-0.4 mm (0.012-0.016 in)
Capacitance 0.17 µF
Coil winding resistance
Primary Secondary
0.8-1.3 Ω
7.2-8.8 kΩ
Bosch WSR 6 F or
Champion RCJ 6 Y
Heat range 200
Electrode gap 0.5 mm (0.02 in)
M 14x1.25; 9.5 mm (0.37 in) long
30 Nm (22.1 Ibf. ft)
30 Nm (22.1 Ibf. ft)
10 Nm (74 Ibf. ft)
5 Nm (3.7 Ibf. ft)
2.5 Nm (1.8 Ibf. ft)
5 Nm (3.7 lbf. ft)
25 Nm (18.4 Ibf. ft)
5