BMW 3 SERIES SEDAN Owner's Manual page 214

Mobility
3. Remove the cover from one side, arrow 3.
4. Press the four fasteners and remove the
cover.
Attaching the covers
1. When attaching the cover, make sure that
all four fasteners are engaged.
2. Attach the cover under the rubber lip and
then thread it between the bars.
3. Press down on the holder and tighten the
three screws.
In the cargo area
Raise the cargo floor panel.
214
Replacing components
Online Edition for Part no. 01 40 2 925 743 - II/14
Information on the fuse types and locations is
found on a separate sheet.