BMW 3 SERIES SEDAN Owner's Manual page 207

Accessing the daytime running lights, high
beams/headlamp flasher and parking
lamps
Follow general instructions, refer to page 204.
1. Open the hood, refer to page 197.
2. Turn the cap counterclockwise and re‐
move.
Parking lamps
6-watt bulb, H6W.
1. Turn the bulb holder counterclockwise and
remove.
2. Press the bulb gently into the socket, turn
counterclockwise and remove.
3. To insert the bulb and bulb holder, proceed
in reverse order of removal. Make sure that
the bulb holder snaps into place.
4. Close the headlamp housing with the cap.
Make sure that the cap engages.
Online Edition for Part no. 01 40 2 925 743 - II/14
Replacing components
High beams/headlamp flasher
55-watt bulb, H7.
1. Tilt the bulb down and then up to loosen it
from the holder and remove.
2. Pull the connector off the bulb.
3. Attach the connector to the new bulb.
4. First insert the bulb at the top with the
strap, arrow 1, and then press down firmly,
arrow 2. Make sure that the bulb snaps into
place.
5. Close the headlamp housing with the cap.
Make sure that the cap engages.
Mobility
207