Log Placement Instructions - Lennox Shadowdance LSVFSD-LP Installation And Operation Instructions Manual

LOG PLACEMENT INSTRUCTIONS

1. Place rear ember bed as shown in Figure 11.
Top Burner
Locating
Pins
Rear Ember Bed
Position Ember Bed All the Way
Forward in Gas Train Assembly
Figure 11 - Install Rear Ember Bed
. Place rear log onto the two rear grate locating pins as shown
in Figure 12 (the locating pins are outlined in Figure 11).
Figure 12 - Install Rear Log
. Place middle log onto left middle grate locating pin and the rear
ember bed locating pin as shown in Figure 13.
Figure 13 - Install Middle Log
10
Install
Ember bed
from behind
top burner
Rear Log
Rear Locating Pins
On Grate Assembly
Middle Log
Locating Pins
Note: Diagrams aND illustratioNs are Not to scale.
4. Place left and right front logs onto front grate locating pins as
shown in Figure 14.
Left Front Log
Locating Pins Indicated by Arrows
Figure 14 - Install Left and Right Front Logs
5. Place left top log onto rear log and middle log locating pins as
shown in Figure 15.
Left Top Log
Locating Pins
Figure 15 - Install Left Top Log
6. Place the center top log onto the rear log locating pin and middle
log locating pin as shown in Figure 16.
Locating Pins
Figure 16 - Install Top Center Log
Right Front Log
Center Top Log