NEC P452H User Manual page 52

Menu Item
INFO� USAGE TIME (B) LAMP LIFE REMAINING
SOURCE(1) (B) RESOLUTION
SOURCE(2) (B) SIGNAL TYPE
HDBaseT
WIRED LAN
WIRELESS LAN
VERSION(1) (B) FIRMWARE
VERSION(2) (B) FIRMWARE2
OTHERS (B) PROJECTOR NAME
RESET CURRENT SIGNAL
ALL DATA
CLEAR LAMP HOURS
CLEAR FILTER HOURS
* The asterisk (*) indicates that the default setting varies depending on the signal.
LAMP HOURS USED
FILTER HOURS USED
TOTAL CARBON SAVINGS
TOTAL COST SAVINGS
HORIZONTAL FREQUENCY
VERTICAL FREQUENCY
SYNC TYPE
SYNC POLARITY
SCAN TYPE
VIDEO TYPE
BIT DEPTH
VIDEO LEVEL
3D SIGNAL
SIGNAL QUALITY
OPERATION MODE
LINK STATUS
HDMI STATUS
IP ADDRESS
SUBNET MASK
GATEWAY
MAC ADDRESS
IP ADDRESS
SUBNET MASK
GATEWAY
MAC ADDRESS
SSID
NETWORK TYPE
SECURITY
CHANNEL
SIGNAL LEVEL
DATA
HOST NAME
MODEL NO�
SERIAL NUMBER
LAN UNIT TYPE
CONTROL ID (when [CONTROL ID] is set)
Default
(B)
(B)
(B)
(B)
(B)
SEPARATE SYNC, COMPOSITE SYNC, SYNC ON GREEN, SYNC ON
VIDEO
INTERLACE, NON-INTERLACE
RGB, VIDEO, YCbCr
NTSC, NTSC3�58, NTSC4�43, PAL, PAL-M, PAL-N, PAL60, SECAM
8[bits], 10[bits], 12[bits]
FULL, ENHANCED, DEFAULT
SUPPORTED, NOT SUPPORTED
NORMAL, WARNING, ABNORMAL
HDBaseT, ETHERNET, LOW POWER, DISCONNECT
NO LINK, HDBaseT, LOW POWER, ETHERNET
NO HDMI, HDMI ON, HDCP ON
(B)
(B)
(B)
(B)
(B)
41
4. Using On-Screen Menu
Options