NEC P452H User Manual page 141

Model name
HDBaseT
Remote terminal
USB port
Ethernet/HDBaseT port
3D SYNC output terminal
Control Terminals
RS-232C terminal (PC control)
Built-in Speaker
Usage environment
Power supply
Power con- ECO
sumption MODE
STANDBY
MODE
Rated input current
External dimensions
Weight
*1 Effective pixels are more than 99.99%.
*2 Compliance with ISO21118-2012
*3 This is the light output value (lumens) when the [PRESET] mode is set to [HIGH-BRIGHT]. If any other mode is selected as the
[PRESET] mode, the light output value may drop slightly.
*4 HDMI (Deep Color, Lip Sync) with HDCP
®
What is HDCP/HDCP technology?
HDCP is an acronym for High-bandwidth Digital Content Protection. High bandwidth Digital Content Protection (HDCP) is a system
for preventing illegal copying of video data sent over a High-Definition Multimedia Interface (HDMI).
If you are unable to view material via the HDMI input, this does not necessarily mean the projector is not functioning properly. With
the implementation of HDCP, there may be cases in which certain content is protected with HDCP and might not be displayed
due to the decision/intention of the HDCP community (Digital Content Protection, LLC).
Video: Deep Color; 8/10/12-bit, LipSync
Audio: LPCM; up to 2 ch, sample rate 32/44.1/48 KHz, sample bit; 16/20/24-bit
*5 35 to 40°C – "Forced eco mode"
• These specifications and the product's design are subject to change without notice.
For additional information visit:
US: http://www.necdisplay.com/
Europe: http://www.nec-display-solutions.com/
Global: http://www.nec-display.com/global/index.html
For information on our optional accessories, visit our website or see our brochure.
The specifications are subject to change without notice.
NP-P502H
Video input Deep Color (color depth): Support 8/10/12 bits
Colorimetry: Support RGB, YCbCr444 and YCbCr422
Support LipSync , HDCP
Audio input Sampling frequency: 32/44.1/48 kHz
Sampling bit: 16/20/24 bit
Stereo mini Jack × 1
Type A 1 for USB memory
Type B 1 for service
RJ-45 × 1, Supports BASE-TX
5 V / 10 mA, synchronized signal output for 3D use
D-Sub 9-pin × 1
20 W (monaural)
Operating temperature: 5 to 40°C
Operating humidity: 20 to 80% (with no condensation)
Storage temperature: −10 to 50°C
Storage humidity: 20 to 80% (with no condensation)
Operating altitude: 0 to 8000 feet/2400 meters
(Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approxi-
mately 4000 feet/1200 meters or higher.)
100–240 V AC, 50/60 Hz
OFF 465 W (100-130 V)
445 W (200-240 V)
NORMAL 379 W (100-130 V)
366 W (200-240 V)
ECO 311 W (100-130 V)
305 W (200-240 V)
NORMAL 0.26 W (100-130 V)/0.33 W (200-240 V)
NETWORK 2.6 W (100-130 V)/2.6 W (200-240 V)
STANDBY
2.2 A (240 V AC) to 5.4 A (100 V AC)
14.3" (width) × 5.1" (height) × 11.9" (depth)/
362 (width) × 129 (height) × 302 (depth) mm (not including protrusions)
14.3" (width) × 5.5" (height) × 12.1" (depth)/
362 (width) × 139 (height) × 306 (depth) mm (including protrusions)
11.46 lbs (5.2 kg)
NP-P502W
, 3D
(*4)
(*5)
(*5)
426 W (100-130 V)
416 W (200-240 V)
346 W (100-130 V)
340 W (200-240 V)
288 W (100-130 V)
286 W (200-240 V)
2.0 A (240 V AC) to 4.9 A (100 V AC)
130
9. Appendix
NP-P452H NP-P452W