Assigning Time Periods To Temperatures, Cdu Mode & Fr Mode - Carrier 33AW-CS1 User Manual

Programming the Control
7. To change the minutes, press start time (
button on the bottom of the screen again. You will
see the minutes in 6:00 AM flashing on the screen.
Press the up or down button and stop on the desired
time.
8. The "stop time" for period 1 (P1) is also the "start time"
for period 2 (P2). To change the stop time for P1 –
which means you are also changing the start time for
P2 – use the instructions in the next step to change
the start time for period 2.
9. To change the start time for period 2 (P2), press the
period button at the bottom of the screen twice. This
displays the information for period 2, with P2 flashing
on the display.
10. Similar way you can program P2, P3, P4, P5 and P6.
11. If you did not select 1 to 7 (all days) when you
started this process, repeat all the steps for your
remaining timeframe choice – 1 to 5 (weekdays), 6 to
7 (weekends) or individual day (1,2,3,4,5,6,7).
12. To confirm that the NUI has accepted your changes,
cycle through the six time periods by pressing days
( ), selecting your time frame – 1 to 7 (all days), 1 to
5 (weekdays), 6 to 7 (weekends) or individual day –
and then pressing the period button to see the hours
assigned for each start time. Each time you press
period ( ) button, you will advance to the next
start time. If the program schedule is incorrect "- -" is
displayed and all three arrows (
13. Press OK or close the door.
Assigning time periods to temperatures, CDU mode & FR mode
Here's an example of a programming would look using the factory-set periods and Touch 'N' Go options.
Pre-set Period
Period Number
Start Time
6:00 AM
8:00 AM
5:00 PM
10:00 PM
11:00 PM
00:00 AM
Complete this schedule according to daily routine and use it as you follow the instructions below.
Pre-set Period
Period Number
Start Time
)
) will be on..
Pre-set Touch 'N' Go
Option for Each Period
1
2
3
4
5
6
Pre-set Touch 'N' Go
Option for Each Period
1
2
3
4
5
6
Home ( )
Away ( )
Home ( )
Sleep ( )
Home ( )
Sleep ( )
Frequency
CDU Mode
Reduction
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
Frequency
CDU Mode
Reduction
9