Kurzweil m230 User Manual page 12

Piano Assembly
Chapte 1
2. Applying Power
Connecting the power cord
First insert the plug of the AC power cord into the AC connector on the Adaptor, then plug the
other end of the cord into the proper AC outlet on the wall. In some areas a plug adaptor may
be provided to match the pin configuration of the AC wall outlets in your area.
Plug the thin DC power cord into the DC Power Jack on the back of the piano.
Turn the power on
Press the power switch located on the right cheek block to turn the power on. The display
located in the center of the front panel should light with various patterns and after a
short time display "GRAND PIANO".
CAUTION
Even when the instrument is turned off, AC power is still flowing to the adapter at a
minimum level. When you are not using the instrument for a long time or during
electrical storms, unplug the AC power cord from the wall outlet.
3. Setting the Volume
To adjust the volume, use the [Volume] knob located on the right cheek block.
Play the keyboard while you adjust the knob to a comfortable and realistic
volume.
NOTE
Adjusting the [Volume] knob also affects the output level of the
Phones jacks and the output level of the Audio Out jacks.
Piano Assembly
12
Power