Installing PC Cards
Removing a PC card
Configuring
Ethernet PC cards
3-10 Installing Internal Accessories
2. Insert the connector end of the PC card
label-side up into the slot.
3. Gently push the PC card in as far as it can
go.
4. Save the filler card for later use.
For ease of access your computer does not cover
the slots for the PC cards. For this reason it is
important at all times to have both slots
occupied by a PC card or a filler card.
Whenever you remove a PC card, replace it with
the original filler card.
Some Ethernet cards expect to use a portion of
memory reserved for the video adapter. If this
happens, you must reconfigure the Ethernet
card. Refer to the TravelMate Online Manual for
instructions.