The Focus Indicator - FujiFilm X70 Owner's Manual

R The camera can show focus distance in meters or feet. Use the A SCREEN SET-UP > FOCUS SCALE UNITS
option in the setup menu (P 106) to choose the units used.
R If ON is selected for G AUTOFOCUS SETTING > PRE-AF in the shooting menu (P 93), focus will be adjusted
continuously in modes S and C even when the shutter button is not pressed.

■ The Focus Indicator

The focus indicator turns green when the subject is in focus and blinks white when
the camera is unable to focus. Brackets ("( )") indicate that the camera is focusing
and are displayed continuously in mode C. j is displayed in manual focus mode.
Checking Focus Checking Focus
To zoom in on the current focus area (P 78) for precise focus, press
the center of the command control. Press again to cancel zoom.
In manual focus mode, zoom can be adjusted by pressing the
command control left or right when STANDARD or FOCUS PEAK
HIGHLIGHT is selected for c MF ASSIST, while if ON is selected for
A SCREEN SET-UP > FOCUS CHECK, the camera will automatically
zoom in on the selected focus area when the control ring is rotated. Focus zoom is not available in focus mode
C or when G AUTOFOCUS SETTING > PRE-AF is on or an option other than r SINGLE POINT is selected for
G AUTOFOCUS SETTING > AF MODE.
P
Focus indicator
M M
Focus Mode
4000 5.6 400
75