Viewing Panoramas - FujiFilm X70 Owner's Manual

The DRIVE Button
Q Panoramas are created from multiple frames; expo-
sure for the entire panorama is determined by the
fi rst frame. The camera may in some cases record an
greater or lesser angle than selected or be unable to
stitch the frames together perfectly. The last part of
the panorama may not be recorded if shooting ends
before the panorama is complete.
Q Shooting may be interrupted if the camera is panned
too quickly or too slowly. Panning the camera in a
direction other than that shown cancels shooting.
Q The desired results may not be achieved with mov-
ing subjects, subjects close to the camera, unvary-
ing subjects such as the sky or a fi eld of grass, sub-
jects that are in constant motion, such as waves and
waterfalls, or subjects that undergo marked chang-
es in brightness. Panoramas may be blurred if the
subject is poorly lit.
70

Viewing Panoramas

Viewing Panoramas
In full-frame playback, you can use the command
control to zoom panoramas in or out. Alterna-
tively, you can play the panorama back using the
selector.
PLAY
Press the selector down to start playback and
press again to pause. While playback is paused,
you can scroll the panorama manually by press-
ing the selector left or right; vertical panoramas
will scroll vertically, horizontal panoramas hori-
zontally. To exit to full-frame playback, press the
selector up.
STOP PAUSE