Selecting A Location - Miller Electric Dimension 652 Owner's Manual

.
A complete Parts List is available at www.MillerWelds.com

4-4. Selecting A Location

Movement
Location And Airflow
3
OM-278 Page 12
1
OR
18 in
(460 mm)
1 Lifting Eye
2 Lifting Forks
Use lifting eye or lifting forks to
move unit.
If using lifting forks, extend forks
beyond opposite side of unit.
3 Rating Label (Non CE Models
Only)
Use rating label to determine input
power needs. Label located under
front access door.
2
4 Rating Label (CE Models
Only)
Use rating label to determine input
power needs. Label located on rear
access door
(see Section 3-5).
5
5 Line Disconnect Device
Locate unit near correct input
power supply.
!
Special installation may be
required where gasoline or
volatile liquids are present −
18 in
see NEC Article 511 or CEC
(460 mm)
Section 20.
4