Table of Contents
Advertisement
RTS Threshold (0~2347): The RTS/CTS (Request to Send/Clear to
Send) function is used to minimize collisions among wireless stations.
If you enable RTS/CTS, it will refrain from sending a data frame until
another RTS/CTS handshake in the air is completed. This field allows
you to enable RTS/CTS by setting a specific packet size threshold.
Default value 2347 is recommended.
DTIM Interval (1~255): DTIM (Delivery Traffic Indication Mes-
sage) is a kind of wireless message used to inform clients in Power
Saving Mode when to wake up to receive broadcast and multicast
messages. This field indicates the time interval in multiples of the
Beacon Interval that the system broadcasts DTIMs for clients in
Power Saving Mode. The default value (3) is recommended.
Beacon Interval (1~65535): This field indicates the time interval in
milliseconds after which the system broadcast packet, called beacon,
is sent to synchronize the wireless network. The default value
(100 milliseconds) is recommended.
Enable Frame Bursting? This field allows you to enable
frame-bursting mode to improve performance with wireless clients
that also support frame bursting.
ASUS 802.11g WL-HDD2.5
57
Advertisement
Table of Contents
