Asus WL-HDD2.5 User Manual page 4

CE Conformity Statement
The CE symbol indicates compliance of this equipment to the EMC Directive and the Low
Voltage Directive of the European Union. These markings indicate that this system meets the
following technical standards:
EN 55022 — "Limits and Methods of Measurement of Radio Interference Characteristics of
Information Technology Equipment."
EN 55024 — "Information technology equipment - Immunity characteristics - Limits and
methods of measurement."
EN 61000-3-2 — "Electromagnetic compatibility (EMC) - Part 3: Limits - Section 2: Limits
for harmonic current emissions (Equipment input current up to and including 16 A per
phase)."
EN 61000-3-3 — "Electromagnetic compatibility (EMC) -Part 3: Limits - Section 3: Limita-
tion of voltage fluctuations and flicker in low-voltage supply systems for equipment with
rated current up to and including 16 A."
EN 60950 — "Safety of Information Technology Equipment."
NOTE: EN 55022 emissions requirements provide for two classifications:
• Class A is for typical commercial areas.
• Class B is for typical domestic areas.
To determine which classification applies to your computer, examine the CE registration
label located on the back panel of the device. If the label indicates a Class A rating, the fol-
lowing warning applies to your device:
RF INTERFERENCE WARNING: This is a Class A product. In a domestic environment
this product may cause radio frequency (RF) interference, in which case the user may be
required to take adequate measures. This device is classified for use in a typical Class A
domestic environment.
iv ASUS 802.11g WL-HDD2.5