Reviewing The Startup Display; Startup Display - DEC 3000 800 Owner's Manual

Reviewing the Startup Display

Reviewing the Startup Display
As your system starts up, it performs a series of diagnostic tests.

Startup Display

A display similar to the one in Figure 6–2 appears on the screen
before the console prompt appears. The console prompt is three
greater-than symbols (>>>).
Figure 6–2 Startup Display
Understanding The startup display provides the status of hardware components
the Startup in your system. The two columns provide the following
Display information:
•
•
6–6 Starting Up the System
DEC 3000 - M800
Digital Equipment Corporation
System conducting power up tests.
----------------------------------------------------
Devnam Devstat
-------- ----------
CPU OK KN17-AA - V3.0-S080-IO60 - DECchip 21064 P3.0
ASIC OK
MEM OK 128MB
NVR OK
SCC OK ptr(0) = Present keybd(2) = Present
NI OK Ethernet Address: 08-00-2B-1D-1E-EF , THICK
SCSI OK
ISDN OK
TC0 OK - PMAGB-BA
----------------------------------------------------
System power up OK.
Enter B to boot software from DKA300
>>>
Devnam indicates the device (or component) name
Devstat lists the device status following the initial hardware
startup tests.