Acl Configuration - D-Link DWL-3500AP Configuration Manual

2.1.7. ACL Configuration

The ACL in this scenario blocks IP traffic between wireless clients who access the
network through D-LINK-NET1 and D-LINK-NET2.
7. From the LAN menu, navigate to the Access Control Lists > IP ACL > Access
Profile Settings page.
8. From the IP ACL field, select Create New Extended ACL from the drop-down
menu.
9. Enter 100 in the ACL ID field, then click Submit.
10. From the Rule Configuration page, enter 1 as the Rule ID, Deny as the Action, and
click Submit.
11. The screen refreshes with additional fields. Click the Configure button associated
with the appropriate fields and enter the following criteria to deny IP traffic from
clients on the D-LINK-NET1 network to clients on the D-LINK-NET2 network:
• Protocol Keyword: IP
• Source IP Address: 192.168.100.0
• Source IP Mask: 0.0.0.255 (This is a wildcard mask)
• Destination IP Address: 192.168.200.0
• Destination IP Mask: 0.0.0.255 (This is a wildcard mask)