Hotpoint CSM22GRD WW Owner's Manual page 6

About the controls on the refrigerator.
The Electronic Monitor and Diagnostic System controls dispenser functions and monitors the operation of your
refrigerator. On some models, the controls will look like one of the following:
Monitor and Diagnostic System
NORMAL
DOOR OPEN
WARM TEMP
Flashing diagnostic codes. What these codes mean—and what to do when they appear—is
explained more thoroughly on the following pages.
SYSTEM CHECK-RESET
codes from the display.
Select CUBED ICE
DOOR ALARM
open 30 seconds.
6
DOOR WARM
N O R M A L
OPEN TEMP
CHILLED CRUSHED
WATER ICE
lights up to indicate that no failure has been detected by the diagnostic system.
flashes when either door is open.
lights up when freezer food-keeping temperature is above normal.
reviews the diagnosis of four coded functions and allows you to erase
, CRUSHED ICE
lights up when the beeper has been set to sound after either door has been
DISPLAY
POWER
DEFROST
FREEZER
ICE MAKER
DISPENSER PUSH BELOW CUBED
ICE
or WATER
and the signal light confirms your choice.
SYSTEM
CHECK
RESET
DOOR ALARM
ON/OFF