Switching On And Off; Before Using For The First Time; Protective Foil; Cleaning And Care - Miele KFN 14947 SDE ed/cs-1 Operating And Installation Instructions

Frost free fridge-freezer with perfectfresh zone and ice cube maker
Table of Contents

Advertisement

Switching on and off

Before using for the first time

Protective foil

The stainless steel trim to the interior
shelves and the door shelves has a
layer of protective foil to prevent
damage during transportation.
On stainless steel appliances, the outer
surfaces are also covered with
protective foil.
^ Do not remove this foil until the
appliance has been positioned in its
final location.

Cleaning and care

^ Treat the stainless steel trim to the
interior shelves and the door shelves
with the Miele stainless steel
conditioning agent supplied as soon
as you have removed the foil.
^ On stainless steel appliances also
treat the side panels with the Miele
stainless steel conditioning agent
supplied as soon as you have
removed the protective foil. The
appliance doors have a special finish
which is resistant to soiling. Do not
use Miele stainless steel conditioning
agent on the appliance doors.
Important. Each time it is used, the
Miele stainless steel conditioning
agent forms a water and dirt repellent
protective coating.
^ Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing up liquid, and then
dry with a soft cloth.
18
Active charcoal filters
(Active AirClean filters)
^ Place the active charcoal filters
supplied in the holder, and place the
holder on one of the refrigerator
shelves (see "Active charcoal filters").

Operating the appliance

A light touch of the finger on the
sensors is all that is required to operate
this appliance.

Switching on

The refrigerator section/PefectFresh
zone and freezer sections are switched
on together with the On/Off sensor.
^ Touch the On/Off sensor until the
temperature display lights up.
The temperature display for the
refrigerator section will show the current
temperature in the refrigerator section.
If the temperature in the freezer section
is above 0 °C, only bars will light up in
the temperature display for the freezer
section. As soon as the temperature is
below 0 °C, the temperature display will
show the current temperature inside the
freezer section.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents