IPIBL-LA(Berkeley-GL8E)
ATX power connectors
3.
HDMI connector (2x8 pin HDMI_HEADERS)
This connector is for an High-Definition Multimedia Interface (HDMI) port(s).
Connect the HDMI module cable to this connector, then install the module to
a slot opening at the back of the system chassis.
The HDMI module is purchased separately.
IPIBL-LA(Berkeley-GL8E)
HDMI connector
IPIBL-LA (Berkeley-GL8E)
ATX12V
+12V DC
+12V DC
GND
GND
ATXPWR
+3 Volts
+12 Volts
+12 Volts
+5V Standby
Power OK
Ground
+5 Volts
Ground
+5 Volts
Ground
+3 Volts
+3 Volts
Ground
+5 Volts
+5 Volts
+5 Volts
-5 Volts
Ground
Ground
Ground
PSON#
Ground
-12 Volts
+3 Volts
15