Canon VB-R11VE Operation Manual page 215

Important
[Video Detection] and [Motion Detection] are exclusive of each other. Only the selected mode operates, the other is disabled.
The settings of the disabled operation mode, however, are retained (except the camera angle) and used if the mode is enabled
again later.
A confirmation screen appears.
[Video Detection]
When you click [Yes], the Intelligent Function Setting Tool launches with its [Lock camera position] selected. If
you click [No], select [Lock camera position] after video detection launches.
[Auto Tracking]
If you click [Yes], you will obtain camera control and can configure Auto Tracking settings. If you click [No],
obtain camera control after Auto Tracking launches and configure Auto Tracking settings.
Set the Selected Operation Mode
3
When [Video Detection] is selected, please refer to "Intelligent Function Setting Tool - Video Detection -" (P. 216)
to configure video detection settings.
When [Auto Tracking] is selected, please refer to "Intelligent Function Setting Tool - Auto Tracking -" (P. 230) to
configure Auto Tracking settings.
6
215