NEC MultiSync E900+ User Manual page 15

E - 6
–
Use the monitor in a clean, dry area.
–
Handle with care when transporting.
–
We recommend to adjust the brightness in a way that the
background raster disappears.
–
For ergonomical reasons we recommend not to use the
position of the maximum contrast control.
–
For ergonomical reasons the preset size and position is
recommended with the standard signals.
–
For ergonomical reasons preset colour setting and preset
side-pincushion setting is recommended.
–
For ergonomical reasons we recommend using non-interlaced
signals with a vertical refresh rate between 75 and 160 Hz.
–
For ergonomical reasons we recommend not to use the primary
colour blue on dark background ( it is difficult to recognise and
produces eye fatigue due to insufficient contrast).
–
To separate the equipment from the power source you have to
remove the plug from the inlet socket.
–
The power outlet socket should be installed as near to the
equipment as possible, and should be easily accessible.
–
We recommend using the power cord supplied with the
monitor. However, if another type of power cord is required,
power cord H05VV-F should be used except in U.K.
–
To clean the CRT surface use a lint-free, non-abrasive cloth
and a neutral cleaner based, non-abrasive cleaning solution or
glass cleaner for best results.
Recommended use