The Fm Reception Is Poor; The Fm Stereo Reception Is Poor - Sony STR-DN1060 Parts And Controls

speaker pattern match correctly.
[240] Troubleshooting
No sound is output from the TV when the receiver is in
standby mode.
When the receiver enters standby mode, sound is output from the last HDMI device
selected before you turned off the receiver. If you are enjoying content from another
device, play the content on the device and perform the One-Touch Play operation, or turn
on the receiver to select the HDMI device from which you want to enjoy content.
Make sure [Standby Through] is set to [On] or [Auto] in the HDMI Settings menu.
[241] Troubleshooting

The FM reception is poor.

Extend and adjust the position of the FM wire antenna (aerial) to a place where the
reception conditions are good.
Place the FM wire antenna (aerial) near a window.
[242] Troubleshooting

The FM stereo reception is poor.

Perform the following procedure:
1. Select [Listen] - [FM TUNER] from the home menu.
2. Select a station on the FM band.
3. Press OPTIONS.
4. Select [FM Mode] from the menu.
5. Select [Monaural].
Sound
Tuner
Tuner