Nesco NC-58100 STEAM KLEAN Instruction Manual page 15

INSTRUCTION FOR USE
1. Open the package, check all parts and manuals, and make sure no
component is missing in the package.
2. Please read the manual before using the product. This product is only for
household using.
3. Put the steam cleaner on the table, push down the safety cover, unscrew the
safety cap counterclockwise, and then Install the funnel. As following chart.
Push Down Counterclockwise
4. Take 200 ml clean water with the measuring cup, and add the water into
the tank. (Max. capacity of the tank is 350 ml. Do not overfill the tank and
some space must be left in the tank). Re-install the safety cap and tighten it in
position.
5. Check the electricity and plug, make sure they match the requirement of
manual, and insert the plug.
6. The steam will be ready after 4 minutes heating. Press the steam button
slightly to see if the steam starts to release.
7. Release the button; insert different parts according to different usage.
8. Press the steam button again; start cleaning.
Part installation
Long spray nozzle installation
Insert the long spray nozzle to the body; follow the arrow to secure the sprayer
in a clockwise way. The sprayer can be removed in an opposite way.
14