Airstream 2001 Bamby Owner's Manual page 42

AIRSTREAM SAFARI –BAMBI TRAILER OWNERS MANUAL 2001
14. Install outer bearing.
15 Install washer and spindle nut
16. While rotating the wheel, tighten the spindle nut with a 12" wrench until there is a slight tension. Then back off
one notch and install cotter pin. There should now be from .001" to .010" endplay in hub. If not, back off one notch.
17. Check and retighten the lug bolts, if necessary, every 50 miles for the first 200 miles of travel. They should be
tightened to torque of 85 ft. lbs.
When greasing bearings by hand, place a glob
grease in the palm of one hand and push the
end of the bearing down into the grease (see
illustration). Keep turning the bearing around
forcing it down through the grease until the
is extruded up through the opposite end. Wipe
extra grease in your hand around the outside of
bearing. It's not necessary to fill the hub and
with grease.
AXLE AND RUNNING GEAR ASSEMBLY
1. Rubber torsion Axle
2. Unicast Hub and Drum
3. Valve Stem
4. Wheel
5. Brake Set
6. Lug Nuts
7. Shock Absorber
8. Shock Absorber Bushing
9. Dust Cover
10. Outer Bearing
11. Inner Bearing
12 Grease Seal
13. Spindle Cover
14 Retainer Bearing
15. Nylon Bushing
D-8
of
large
and
grease
the
the
dust cap