Aligning The Print Head - Canon MG5700 Series Online Manual

Aligning the Print Head

If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head
position.
Note
• If the remaining ink level is low, the print head alignment sheet will not be printed correctly.
Replace the ink tank
You need to prepare: a sheet of A4 or Letter-sized plain paper (including recycled paper)*
* Be sure to use paper that is white and clean on both sides.
1. Make sure that the power is turned on.
2. Load a sheet of A4 or Letter-sized plain paper in the cassette.
After pushing the cassette back, the paper information registration screen is displayed on the LCD.
Select A4 or Letter for Page size and Plain paper for Type, then press the OK button.
If a message is displayed on the screen, follow the directions in the message to complete registration.
3. Open the paper output tray gently.
4. Select Setup on the HOME screen.
LCD and Operation Panel
The setup menu screen will appear.
5. Select Maintenance, then press the OK button.
The Maintenance screen will appear.
6. Select Auto head alignment, then press the OK button.
whose ink is low.
195