Advertisement
Quick Links
Advertisement
Related Manuals for Century HDD Copy Pro KD25/35PRO
Summary of Contents for Century HDD Copy Pro KD25/35PRO
- Page 1 HDD Copy Pro KD25/35PRO INSTRUCTION MANUAL...
-
Page 2: Contents Of This Document
Contents of this document *Specifications *Package contents *Name of each part *Supported machines, OS *How to set *Changing mode *Summary of each mode * Use KD25/35PRO not connecting to PC -COPY -COMPARE -CHECK -DATA ERASE -Error during initializing -Display during processing of stand-alone operation -If an error occurred during processing of stand-alone operation *Use KD25/35PRO connecting to PC -STANDARD... - Page 3 Specifications ： ： ： ： KD25/35PRO model number Product name : HDD Copy PRO Interface : Based on USB Rev2.0 / eSATA USB connector type : Type B Weight : 360g Dimension : 146mm (W) x 102mm (D) x 25.4mm (H) : 5～...
- Page 4 Name of each part...
- Page 6 Supported machine・ ・ ・ ・ supported OS Supported machine・ ・ ・ ・ supported OS Macintosh 【 【 【 【 Supported machine】 】 】 】 e-SATA support 【 【 【 【 supported OS】 】 】 】 MacOS 10.3 and after * Not all the operations in every environment are guaranteed. Connecting e-SATA Windows...
- Page 7 How to set Before connecting PC: [Warning!] *please pull out the power supply plug before connecting HDD. If you operate in the state that a computer is switched on, it may cause an accident such as electric shocks and trouble of the machine. ・...
- Page 8 How to connect 3.5"HDD 1. Prepare HDD at MASTER mode. Set an HDD in MASTER mode. Please refer to an instruction manual of an HDD for setting. [ex.] HDD by HITACHI Note) This is an example. When you set please refer to instruction manual of your HDD.
- Page 9 How to connect 3.5" S-ATA HDD 1. Connect the S-ATA cables to HDD Connect the SATA cable and the power supply cable to HDD. Please be careful that you are connecting the cables in correct direction. As pushing the cables forcibly may cause trouble of the machine, please handle them carefully.
- Page 10 How to connect 2.5" S-ATA HDD 1. Prepare HDD at MASTER mode. Set HDD in MASTER mode. As for 2.5 inches HDD, leave the two pins at the left side nothing stuck. 2. Connect cables (for 2.5"HDD) to HDD Connect the flat cables to HDD. Please be careful that you are connecting the cables in correct direction.
- Page 11 How to connect 2.5" S-ATA HDD Connect the cable for 2.5"HDD to HDD Connect the flat cable to HDD. Please be careful that you are connecting the cables in correct direction. As pushing the cables forcibly may cause trouble of the machine, please handle them carefully.
- Page 12 Caution when connecting 1. Put the mats under HDDs when using. 2. HDD is a precision instrument. Please do not touch the main board and the connector part of HDD. 3. While HDD is operating, please do not touch the flat cable and the power supply cable.
- Page 13 ＊ ＊ ＊ ＊ USB and eSATA cannot be used connected to this machine at the same time. ＊ ＊ ＊ ＊ SATA HDD and a parallel HDD cannot be used connected to the same drive side at the same time.
- Page 14 changing mode KD25/35PRO judges weather it is connected to a PC or not automatically, and in each state the selectable modes are different; depends on if it is connected to PC or operating by itself. Mode choice will be displayed after having turned on a power supply. Turn the mode switch to choose a mode you need.
- Page 15 Summary of each mode The modes when KD25/35PRO operates alone ・ COPY DISK COPY MODE - copies the data from HARD DISK1 to the HARD DISK 2. PARTITION COPY MODE - copies part of the data from HARD DISK1 to the HARD DISK 2. (copies only top partition of THE HARD DRIVE) ・...
-
Page 16: Data Erase
copying is performed correctly. PARTITION COMPARE check whether PARTLY contents of two HDDs are same. You can confirm that copying is performed correctly. CHECK ・ ・ VERIFY CHECK - verifies disk(s). Two disks can be checked at the same time. DISK CHECK - verifies disk(s). -
Page 17: Standard Mode
When connected to PC [STANDARD MODE] ・ It recognizes the connected hard disk 1 [COMBINE MODE] ・ ・ ・ ・ Two HDDs can be recognized as one big HDD with high capacity. Ex.) If you connect an HDD with capacity of 250GB to HD1 and another HDD with 300GB to HD2, and set it in ‘combine mode’, they will be recognized as one HDD with capacity of 550GB. - Page 18 [MIRROR MODE] ・ Writes in data to both HDDs once at the same time. As it writes in the same data, it can be used for saving important data which should not be lost for some reason such as trouble. IMPORTANT: Before using ‘mirror mode’, please make two HDDs the same state with ‘copy mode’...