Sears GT 16 Owners Mnaual page 8

FIGURE 14
ROD
GUIDE
ASSEMBLY
FIGURE 15
ROD
GUIDE
ASSEMBLY
- 6 -
I F YOUR TRACTOR LOOKS LIKE THE PICTURE ON
THIS MANUAL COVER AND FIG. 3 , FOLLOW STEP 14.
14. Assemble Rod Guide Assembly to Tractor using:
@
Hex Bolt, Flat Washer, Lockwasher and Hex Nut (shown
fu ll size) f ound in bag of parts.
a. Inse rt Hex Bolt through Chassis Channel from the inside
(Fig. 13).
b. Place Rod Guide Assembly, Fl at Washer, Lockwasher
and Hex Nut over Bolt and tighten Nut securely.
IF YO UR TRACTOR LOOKS LIKE F IG'S. 1 AND 2, FOL-
LOW STEP 15.
15. Assemble Rod Guide Assembly to Tractor :
a. Remove Cover ( Fig. 14 ).
b . Loosen Hex Bolt.
c. Place Rod Gui de Assembly on Bo lt between Flat Washer
and Chassis Channel and tighten securely.
d . Replace Cover.
FOR ALL OTHER TRACTOR MODELS, FO L LOW STEP 16.
16. Assembl e Rod Guide Assembly to Tractor:
a. Remove Cover (Fig. 15).
b. Loosen Muffler Guard Bracket Bolt.
c. Place Rod Guide Assembly on Bolt between Flat Washer
and Bracket and t ighten securely.
d. Replace Cover.