Advertisement
Quick Links
Advertisement
Summary of Contents for Northern Telecom Unity I
- Page 2 UNITY I FEATURES Refer to FEATURE DESCRIPTIONS Section for detailed information. The easy-to-follow instructions which Your User Guide contains important follow must be carried out in correct of yourset:readeachstepcarefultyand location tar future usa retain this information for future reference dial...
- Page 3 UNITY MESSAGE WAITING FEATiR UNITY FEATURES Refer to FEATURE DESCRIPTIONS Section for detailed information. Fully modular Link button Fully modular dial Phone number and directory dial card Visual ringing Release button Tone ale&r control Message waiting Message Waiting Lamp Alerter High-Low-Off switch Phone number and directory card Visual ringing Alerter High-Low switch (no Off positlon)
-
Page 4: Handset Installation
HANDSET INSTALLATION -- eadh item from its pro&c&e packaging STEP 1 IDENTIFY COMPONENTS. Packed before beginning the instatlation separately within the carton you will find procedures (The wall-mount kit shown all supplied items which are to be right side of telephone set as shown in below Is an optional item available from attached to the telephone set housing Fig. -
Page 5: Installation
STEP 3 Type or print your area code and Alerter tone control All UNITY I as the telephone numbers you wish to This base-located control (Fig. H) allows Release(R) button have on index for easy reference. -
Page 6: Care And Use
Please Note: This telephone has been wired for private line service and should 4 PBX/CO Switch: (For UNITY I and II own. only.) Thls fwo-position base-located dial tone, check to make sure all plugs switch (Fig. - Page 7 LOAD NUMBER ENT OF COMMUNICATIONS NOTICE The load number of the telephone is 10A. If the maximum total load number of 100 is exceeded, the telephone on that line Load numbers are a new concept may not ring or may ring poorly. In The Canadian Department of Existing telecommunications company deslgned to help you determine how...