Safety Instructions / Warnings; Important Safety Instructions; General Warnings - Midland enerjump User Instructions

Jump starter - energy pack
Hide thumbs Also See for enerjump:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 9
ENGLISH

SAFETY INSTRUCTIONS / WARNINGS

 
• Charge ENERJUMP fully prior to use.
• WARNING: Keep the unit clear of fire and water.
• WARNING: Shock Hazard. Keep away from children. Do not insert
foreign objects into the jumper cables port/jack, the USB output port,
or the DC input jack. Do not open ENERJUMP.
• WARNING: Explosion Hazard. Do not use this product where the-
re are flammable fumes or gases, such as in the bilge of a gasoli-
ne-powered boat, or near propane tanks.
• WARNING: Fire Hazard. Do not crush or puncture ENERJUMP. Do
not short circuit metal contacts or cables. Always disconnect the jump
start cables from ENERJUMP after each use and store separately.
The jump start feature is designed for short term operation only (not
more than 3 seconds). Allow ENERJUMP to cool down for at least 1
minute after each jump start attempt.
• Do not touch cables immediately after use.

IMPORTANT SAFETY INSTRUCTIONS

• Operating temperature: Using ENERJUMP at high or low tempera-
tures may reduce the internal battery capacity and shorten the battery
life. Note: In extreme cold weather conditions, please bring ENERJU-
MP indoors for best results.

GENERAL WARNINGS

• Remove personal metal items such as rings, bracelets, necklaces,
and watches when working with batteries.
• ENERJUMP is supplied with a rechargeable Li-Cobalt battery. This
  
ENERJUMP - 7

Advertisement

Table of Contents
loading

Table of Contents